FAUX GREEN WALL INSTALLATION GUIDELINES
Our interior and exterior custom faux green wall panels are factory per-installed-mounted on a 4′ x 4′ aluminum panel which is custom cut to fit your designated area. Approximate total weight with faux plants, aluminum mounting & foam for a 4’’ x 4′ green wall panel is about 40 lbs. The individual 4’ x 4’ panels can be stacked on a standard pallet for shipping.
Our interior and exterior custom faux green wall panels are factory per-installed-mounted on a 4′ x 4′ aluminum panel which is custom cut to fit your designated area. Approximate total weight with faux plants, aluminum mounting & foam for a 4’’ x 4′ green wall panel is about 40 lbs. The individual 4’ x 4’ panels can be stacked on a standard pallet for shipping.
Place your panel against the top far corner and attach the panel using a staple gun or screw. Repeat the same procedure for the next panel. To avoid markation lines between each panel, make sure to use foliage from edge of first panel to camouflage edge of next panel before stapling or screwing into wall. Drywall screws are recommended for dry wall applications. We typically recommend 4 attachment points per panel. Identify the correct direction of the foliage to ensure they look their best (i.e. many vertical gardens have foliage going upwards to ensure it looks like they are growing. Once installed, if needed you can trim any excess off with scissors or cutters.
The plastic mesh panel backings allow for easy installation using a
modular grid system which can also easily be cut as needed
The best part about our custom faux green walls is that no structural work is needed before installation since the panels are light. Be sure to note the different surfaces the panels can attach to and what is recommended for each surface:
Wall Type
The best part about our custom faux green walls is that no structural work is needed before installation since the panels are light. Be sure to note the different surfaces the panels can attach to and what is recommended for each surface:
- Gyprock/Plasterboard – Screw directly into the wall using a screw with a good thread.
- Concrete – Tapcon concrete screws are best for concrete walls.
- Wood – Simple wood screws only. Try using a screw with a large head for more coverage.
- Stone wall – Tapcon concrete screws are best for stone walls.
Simple Steps to install green wall panels to Walls.
- 1) Tools needed: Drill with drill bit, appropriate screws for surface area (wood or concrete surface)
- 2) For shipping purposes, each faux green wall will arrive in smaller pre-cut panels mounted which will be ready to install onto your surface area. In addition, each panel will be be numbered (1-2-3 etc…) in the order that each panel should be installed.
- 3) Each individual panel has a built-in tube in each corner to be drilled directly to surface area. Begin from left side of surface area working your way towards the right, one panel at a time. Use appropriate screws based on surface area. We recommend 4 screws in each corner per panel.
- 4) Continue procedure till you reach the last panel at the end of the surface area until your installation is complete.
We also offer on site installation services upon request.
Should you require further technical assistance please callus at 1-877-445-6151
